Category Archives: interview

Building A Straw Bale House: Concept to Construction

truthwindow.jpg

Since I was a little girl, my dad has been indoctrinating me with a love and respect for the environment. He’s a true outdoors-man and conservationist and has been recycling, composting, shutting off the lights and turning down the heat since before it was easy or cool, despite the (occasional) aggravation of his family. Now that he and my mom are getting close to their retirement years, he has decided to take his environmental consciousness to the next level. About a year ago he began researching and making plans to build an energy efficient straw bale house in the East Mountain area outside of Albuquerque, New Mexico. The ultimate do-it-yourself-er (and all around smart ninja), he has designed a home and written his own software program to lay out preliminary building plans and model a dynamic energy balance for the house. With the model done and property bought, he is now moving on to the next stages of development. He has handed his conceptual designs over to an architect to get final design and construction drawings and he is working with a builder in Albuquerque who has experience in straw bale construction. This weekend he will be visiting the site in New Mexico. I asked him to say a few words (I got more than a few) for green.mnp about his concept, design and software:

Solar House Software
I’m a software developer. This house project has many aspects where software can help – creating building designs and plans, analyzing energy systems, and keeping track of the many kinds of information and resources involved in a construction project. So I’ve developed my own “House” software, which is geared to the design and building of an energy efficient solar house. It’s a combination of a people and resources organizer, an architectural drafting program, a building project estimator, and a solar heating and cooling energy analysis program.

livingroomviewplan.jpg

Energy Design
The principles of passive solar heating are very simple: heavily insulate the building envelope, include a lot of thermal mass inside the insulated space, and put most windows on the south side, with overhangs or landscaping for summer shading. Depending on where you are located, these simple elements can greatly reduce or even eliminate your fuel use and heating costs. A big step in reducing your carbon footprint.

Ever since I started focusing on this project I’ve been horrified to notice how most of our current housing stock totally ignores passive solar design principles. Drive around almost anywhere and look at the windows on the houses. You will see virtually no orientation to the sun. This should change drastically, at least for new construction, if we are to start doing our part on global warming.

livingroomviewsouthelev.jpg
South elevation

One of the books I found most helpful on energy design was The Passive Solar House, by James Kachadorian. He is an engineer, and he includes all the information and tables you need to perform a rough energy analysis of passive solar heating. He advocates a system of storing heat energy in the thermal mass of a concrete slab resting on a bed of cinder blocks. The cinder blocks are arranged to form channels through which air circulates, storing heat energy in the slab or pulling from it, depending on the time of day and the season. The ability to store and retrieve thermal energy is important in a passive solar design, to even out the temperature swings during the 24 hours of the day. So I included a cinder block based slab in my initial designs.

Starting with some of Kachadorian’s energy calculations I began writing energy analysis into the program. To cover some additional aspects I had to give myself a crash course on heat transfer engineering. The program now uses the accepted principles of modeling the “heat energy balances” of the outside surfaces, inside surfaces, and room air temperature. And it allows me to model different strategies and systems of heating and cooling.

An energy analysis is just not a simple thing. You are looking at lots of variables and how the all interact. I groped around for a while with how to display and evaluate the findings. What I arrived at was a graph showing room temperature, and the temperatures of the walls, thermal mass, etc. over the 24 hours of a day. By viewing this graph under various scenarios I can evaluate a range of design options and solar strategies for both winter and summer needs.

24hrmodelcbslabwinfanoff.jpg
Focus first on the green line – room temperature. It shows the large temperature swing (about 8 degrees) of the basic passive solar, without running air through the cinder block channels in the slab. The temperature swing would be much greater without all the passive thermal mass in the slab and interior cinder block walls.

24hrmodelcbslabwinfanon.jpg
The green room temperature line shows that running the room air through the slab can moderate the highs and lows some, but only reduces the temperature swing from about 8 degrees to about 6 degrees.

East Mountain Energy Strategy
I’ve come to feel that our chosen location in the East Mountain area of greater Albuquerque has one of the easiest possible climates for a solar home. While the winter temperatures can get down in the teens at night, there is plenty of sunshine for solar heating. With good insulation and some thermal mass there is no problem bringing in enough passive solar heat. The main heating problem is avoiding too much temperature swing – overheating in the afternoons.

And, being at a higher altitude than Albuquerque itself, the summer temperatures never get above the nineties – ok, so far! But more importantly, they always fall to the low sixties or below at night. That means that cool night air can be brought in and absorbed by the thermal mass, which then will keep the house comfortable through the heat of the day.
This all sounds fine in principle, but the real test is quantitative. Can the winter and summer temperature swings inside the house be kept within an acceptable range. That’s where the 24 hour graph tells the tale for each scenario – each combination of outside temperature range and heating or cooling strategy.

From cinder block slab to hot water tank.

What the 24 hour graphs showed was that the cinder block slab system did only a moderately good job of evening out winter temperature swings. I could have a range of around 8 degrees – say 71 in the early morning and 79 in mid-afternoon. That might be fine or it might be a little much – hard to say until you live in it!

But I also began to realize that there was not enough extra heat storage to do much about cloudy days. I would need to burn some kind of fuel for the cloudy or stormy times. This is not the end of the world, and I enjoy using a wood stove. But I also liked the idea of getting as close to 100 percent solar as possible. So I looked into using a set of solar collectors on the roof and a large water tank for thermal storage. Water is a much more efficient and flexible medium for storing heat energy than cement. Running hot water through tubing in the slab to provide radiant heat is a well accepted technique. And I liked that using such a system would also provide domestic hot water. The big benefit was that I could store up enough heat for several days of cloudy weather, depending on the size of the water tank. A bonus was that I knew Miki would love to have a spa, and the spa would make a good “heat sink” for the excess hot water generated in the summer.

So I tweaked the software to model this system as an alternative to the cinder block slab. This “active” solar system adds to the initial cost, though that cost is partly offset by eliminating the slab cinderblocks. Combined with the basic passive solar design, it provides much better temperature control (around a 3 degree swing), all our hot water, heat for two or three cloudy days, and heat for the spa. As a result, I feel that the hot water system is best for us. It will be more expensive to install, but cheaper to run and more environmentally friendly.

24hrmodelwatertankwinpumponventon.jpg
Here’s the water tank system with the pump (red dots) providing radiant heat via the slab in the late night and early morning hours, and the outside vent (blue dots) removing excess heat in the afternoon. The green line shows the three degree temperature swing.

This is where things stand now. I need to verify or calibrate my energy analysis against a reliable commercial or government program. I’m working with an architect to turn my conceptual plan into a finished design and construction drawings. I also have a builder in Albuquerque who is experienced with straw bale construction. We start with the garage this fall, and then the main construction next year. I’m planning more installments of this article to document the building process. I would welcome any comments or suggestions.

-Jack Partridge, Bahama, NC
Be expecting more posts on the progress of my dad’s straw bale house over the next weeks, months…year. I am especially excited to get to construction time, when we will all go out to New Mexico to help stack up the straw bale frame. Building the house will be a whole family & friends affair.
I know this is a long post already, but here is a great video from strawbale.com that dispels some of the myths about straw bale construction, as well as showcases some beautiful straw bale homes:
[youtube]http://www.youtube.com/watch?v=BkWQnQ70wVQ[/youtube]

We Are a Nation-State

070406_le15_xtrawide.jpg

He is a republican, he was a body builder and most importantly, he and his state, California, are leading figures in the fight on global warming. Newsweek has a great interview with the ‘governator’ in their April 16th issue, and it’s definitely worth a read.  Anyone else starting to get a man-crush?

BRESLAU: Do you find your fellow Republicans feel betrayed, like you’ve turned into a tree hugger?
SCHWARZENEGGER: I don’t think they say I did something that is destroying them, because even if they don’t believe in it, what’s the harm? There are Republican governors who want [environmental reforms], but they haven’t figured out how to go there. They ask me, “How do you get away with this among Republicans?” I’ve told them, “Look, if you need me to come to your state and campaign so you can talk about it, I’m there.”

So this is a new California movement.
I think you have an unbelievable opportunity to go really all out and to make this something that everyone in the world writes about us, gets inspired by us, copies us, follows us.

Read more at the link below:

[Newsweek/MSNBC]

The Call for Draconian Cuts

While some critics have accused Al Gore of exaggerating the problem of climate change (and its implications), there are some who believe he is actually sugar-coating the truth:

Most prominently, the renowned British scientist James Lovelock thinks that the world is already approaching a tipping point, beyond which temperature rise will run out of control and major ecosystems will collapse. The dying Amazon rainforest would begin releasing carbon, making things even hotter. The permafrost would melt, releasing carbon and causing sea levels to rise.

George Monbiot, a writer we have posted on before, has come up with a plan in “Heat: How to Stop the Planet from Burning.” The proposed solutions won’t be easy to execute:

To avoid hitting the “critical threshold,” he says, the world’s total carbon emissions must be reduced to 60 percent below current levels by 2030—a target that would require the developed world to reduce emissions by 90 percent (to compensate for growth in China, India and other developing countries). Monbiot’s plan: each nation would be allocated a carbon limit based on urban population and each individual an annual carbon allowance. Governments, meanwhile, would redesign transport systems, generate renewable electricity, build energy-saving homes and offices, and update the old ones. Appliances would be “smart” enough to know when to turn themselves off. And his most radical idea: airline travel would have to be scrapped.

Newsweek has sat down with Monibot for interview, and it’s quite interesting.  Check it out:

The Ninety Percent Solution

More at:

TurnUptheHeat.org

Monbiot.com

BP’s Bet on Butanol

Most people know ethanol is far from perfect.  It can’t be transported in pipelines and it delivers far less energy than gasoline on a gallon-for-gallon basis.

Ethanol is a good start. But ethanol was not designed to be a fuel. No one sat down and said, “Let’s create a biomolecule that will operate in engines.” What happened was, people said ethanol can work in engines. As a lot of people are becoming aware, it’s good, but it has some drawbacks. Butanol is, we think, an innovation that overcomes many of the drawbacks.

You shouldn’t view butanol as being a competitor to ethanol. An ethanol plant can evolve into a butanol plant. And you can mix ethanol and butanol together, and it can actually help you use more ethanol.

BP thinks it has the answer: butanol.  Like ethanol, the fuel can be made from corn starch, sugar cane, or sugar beets, but it can be shipped in pipelines and has a higher energy content than its better known biofuel counterpart.  Butanol made its way into headlines last year after BP and DUPont announced a partnership to develop new technology to bring the fuel to market.  Last month, BP also announced a new 10-year, $500 million project with UC Berkely on biofuels like bio-butanol.

The key way is higher energy density. Whereas ethanol is around about two-thirds the energy density [of gasoline], with butanol we’re in the high eighties [in terms of percent].

It’s less volatile [than ethanol]. It isn’t as corrosive, so we don’t have issues with it at higher concentrations beginning to eat at aluminum or polymer components in fuel systems and dispensing systems. And it’s not as hydroscopic–it doesn’t pick up water, which is what ethanol can do if you put it in relatively low concentrations. So we can put it through pipelines.

[TechnologyReview]

Related: Biobutanol – the overlooked biofuel

Seven Questions: The Ethanol Effect

Foreign Policy, one of the magazines we subscribe to here at mnp, has posted an interesting interview with Lester Brown of the Earth Policy Institute on its website:

FOREIGN POLICY: You’ve written a lot in the past about what would happen if the United States converted to an ethanol-based fuel system for cars. Have your predictions come true?

Lester Brown: Most people know ethanol production in this country is growing, but they don’t know how fast. About a year and a half ago, right after Katrina, a trend that had been near horizontal became almost vertical. The capacity of plants now under construction is equal to the capacity of all the plants built in the last 26 years. If the pace of new starts continues from now to the end of June, roughly 140 million tons of corn will be going into ethanol. That’s over a third of the U.S. grain harvest, so it’s not trivial. And just to give you a sense of how big the U.S. corn harvest is, the corn harvest of Iowa exceeds the entire grain harvest of Canada.

FP: What are the implications of so much corn being used for fuel?

LB: The ethanol advocates like to say “we don’t eat much corn,” which is true. But in Mexico and some Central American countries, it is the food staple. It’s even more important as a source of feed. Our refrigerators are stuffed with corn: milk, eggs, cheese, chicken, pork, beef, yogurt, ice cream—these are all corn products. The risk is that by converting so much of our grain into fuel for cars, we will drive up the price of grain and create chaos in the world grain markets. This could mean urban food riots in scores of low- and middle-income countries around the world. We’re already seeing this in Mexico with the tortilla demonstrations…

For more, follow the link below:

[ForeignPolicy]